View the manual for the Onkyo TX-NR575 here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Onkyo TX-NR575 or do you need help?Ask your question here
The Onkyo TX-NR575 is a surround receiver with 7.2 audio output channels, providing a multi-dimensional sound experience. It delivers a power output of 80 W per channel at 20-20KHz with an 8 Ohm load, ensuring sufficient audio performance. The receiver can also handle a 6 Ohm load at 1KHz, delivering a power output of 170 W per channel.The dynamic power per channel varies depending on the impedance. With a 3 Ohm load, it offers a power output of 160 W, while with an 8 Ohm load, it delivers 85 W, and with a 4 Ohm load, it provides 125 W of power. This versatility allows the receiver to adapt to different speaker setups.The Onkyo TX-NR575 has a low Total Harmonic Distortion (THD) level of 0.08%, ensuring accurate reproduction of audio signals. With a damping factor of 49, it effectively controls the speakers' behavior, ensuring tight and controlled bass response.With an input sensitivity of 200 mV and an input impedance of 47,000 Ω, the receiver accepts various audio sources. The output impedance is 470 Ω, allowing it to efficiently power satellite speakers with an impedance of 16 Ω.Furthermore, the Onkyo TX-NR575 boasts a high Signal-to-Noise Ratio (SNR) of 106 dB, minimizing background noise and providing clear and detailed sound reproduction.Overall, the Onkyo TX-NR575 is a versatile surround receiver with solid power output, low distortion, and high SNR. Its comprehensive specifications make it suitable for a wide range of audio setups, ensuring immersive and high-quality audio experiences.
![User manual Onkyo TX-NR575 (English (1) User manual Onkyo TX-NR575 (English (1)](https://i0.wp.com/www.manua.ls/thumbs/features/s/220.jpg)
General
Brand | Onkyo |
Model | TX-NR575 | TX-NR575 (B) |
Product | receiver |
EAN | 0889951000891, 4573211152456 |
Language | English |
Filetype | User manual (PDF) |
Audio
Audio output channels | 7.2 channels |
Receiver type | Surround |
Power output per channel (20-20KHz@8 Ohm) | 80 W |
Power output per channel (1KHz@6 Ohm) | 170 W |
Dynamic power per channel (3 Ohm) | 160 W |
Dynamic power per channel (8 Ohm) | 85 W |
Dynamic power per channel (4 Ohm) | 125 W |
Total Harmonic Distortion (THD) | 0.08 % |
Input sensitivity | 200 mV |
Input impedance | 47000 Ω |
Output impedance | 470 Ω |
Frequency range | 10 - 100000 Hz |
Signal-to-Noise Ratio (SNR) | 106 dB |
Pre-out connectivity | Yes |
Audio D/A Converter (DAC) | 32-bit/384kHz |
Technical details
Damping factor | 49 |
Satellite speaker impedance | 16 Ω |
Product color | Black |
AirPlay | Yes |
Handheld remote control | Yes |
On Screen Display (OSD) | Yes |
Audio Return Channel (ARC) | Yes |
Apple docking | No |
Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby TrueHD |
Display | - |
x.v.Color support | Yes |
Deep color support | Yes |
Multi-Room Streaming (MRS) support | Yes |
Digital Signal Processing (DSP) | Yes |
Satellite speaker crossover frequency | 200 Hz |
Radio
FM band range | 87.5 - 107.9 MHz |
AM band range | 530 - 1710 kHz |
Supported radio bands | AM, FM |
Internet radio | Yes |
Internet radio services supported | Spotify |
Preset stations quantity | 40 |
Power
AC input voltage | 120 V |
AC input frequency | 60 Hz |
Power consumption (typical) | 460 W |
Power consumption (standby) | 0.15 W |
Weight & dimensions
Width | 435 mm |
Depth | 378 mm |
Height | 173.5 mm |
Weight | 9400 g |
Packaging data
Package weight | 12000 g |
Package dimensions (WxDxH) | 539 x 450 x 260 mm |
Packaging content
FM antenna | Yes |
AM antenna | Yes |
Manual | Yes |
Batteries included | Yes |
User guide | Yes |
Video
3D | Yes |
Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
Optical drive
Optical drive included | No |
Storage
Card reader integrated | No |
Network
Ethernet LAN | Yes |
Wi-Fi | Yes |
Bluetooth | Yes |
Bluetooth version | 4.1 |
Bluetooth profiles | A2DP, AVRCP |
Bluetooth Low Energy (BLE) | Yes |
File formats
Audio formats supported | AAC, AIFF, DSD, FLAC, MP3, WAV, WMA |
Ports & interfaces
Speakers connectivity type | Binding post |
FM antenna ports quantity | 1 |
Outputs
Headphone connectivity | 6.3 mm |
Headphone outputs | 1 |
Number of HDMI outputs | 1 |
Inputs
USB ports quantity | 1 |
PC Audio in | Yes |
HDMI in | 4 |
Composite video in | 2 |
Digital audio optical in | 2 |
Digital audio coaxial in | 1 |
Ethernet LAN (RJ-45) ports | 1 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Onkyo TX-NR575 below.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Can bluetooth devices of different brands be connected to each other?
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
How can I best clean my receiver?
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Wat is Dolby Atmos?
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
What is the weight of the Onkyo TX-NR575?
The Onkyo TX-NR575 has a weight of 9400 g.
What is the height of the Onkyo TX-NR575?
The Onkyo TX-NR575 has a height of 173.5 mm.
What is the width of the Onkyo TX-NR575?
The Onkyo TX-NR575 has a width of 435 mm.
What is the depth of the Onkyo TX-NR575?
The Onkyo TX-NR575 has a depth of 378 mm.
How do I connect my Onkyo TX-NR575 receiver to my TV?
Start by using an HDMI cable to connect the HDMI OUT port on the receiver to an HDMI input on your TV. Then, select the corresponding HDMI input on your TV using the TV remote control.
How can I set up Wi-Fi on my Onkyo TX-NR575 receiver?
Press the Home button on the remote, navigate to the Network Setup option, and select Wi-Fi Setup. Follow the on-screen prompts to connect the receiver to your Wi-Fi network by entering the network name and password.
How do I perform an automatic speaker calibration with the Onkyo TX-NR575?
Press the Home button on the remote, navigate to the Speaker Setup option, and select AccuEQ Room Calibration. Follow the instructions on the screen to place the provided microphone at your listening position, then let the system analyze and adjust the speaker settings accordingly.
How can I adjust the bass and treble levels on my Onkyo TX-NR575?
Press the Tone button on the remote to access the tone controls. Navigate to the desired frequency range (bass or treble) using the arrow buttons and adjust the level up or down using the volume control dial.
How do I reset my Onkyo TX-NR575 receiver to its factory settings?
Press and hold the "CBL/SAT" button on the front panel of the receiver while pressing the "On/Standby" button. Keep holding the "CBL/SAT" button until "Clear" is displayed on the front panel and the receiver switches off. This will reset the receiver to its factory settings.
How many audio output channels does the Onkyo TX-NR575 have?
The Onkyo TX-NR575 has 7.2 audio output channels. This means it is capable of delivering immersive surround sound to enhance the user's audio experience.
What is the power output per channel at 8 Ohm for the Onkyo TX-NR575?
The power output per channel at 8 Ohm for the Onkyo TX-NR575 is 85 W. This indicates that it has a relatively low power output compared to some other receivers in the market, but can still provide decent audio performance.
What is the total harmonic distortion (THD) of the Onkyo TX-NR575?
The Onkyo TX-NR575 has a total harmonic distortion (THD) of 0.08%. This indicates that it has a relatively low distortion level, resulting in cleaner and more accurate audio reproduction.
What is the input sensitivity of the Onkyo TX-NR575?
The input sensitivity of the Onkyo TX-NR575 is 200 mV. This means it is able to efficiently process audio signals from various sources, ensuring a consistent and optimal audio performance.
What is the signal-to-noise ratio (SNR) of the Onkyo TX-NR575?
The Onkyo TX-NR575 has a signal-to-noise ratio (SNR) of 106 dB. This indicates that it is capable of delivering high-quality audio with minimal background noise, resulting in clear and immersive sound reproduction.
Is the manual of the Onkyo TX-NR575 available in English?
Yes, the manual of the Onkyo TX-NR575 is available in English .
Is your question not listed? Ask your question here